Malström Overview Overview (3a) Routing Example 1: Osc A --> Output Osc B --> Output This is the one of simplest ways to route sound through the Malström: The only module switches turned on are Osc A and Osc B. Also, no routing switches are turned on. Both oscillators are automatically routed to the Volume/Spread section, and out the back of the Malström's hardware outputs. Even if you turn on the Filters and the Shaper at this point, they will have no effect on the sound whatsoever. This is because all of the routing switches are turned off. Routing Example 1 | Routing Example 2 | Routing Example 3 Overview (1) | Overview (2) | Overview (3) | Malström Tutorial Home